10MX from

Hardware

Specifications

10mx - Miscellaneous Hardware

Phase Noise (SSB): 1Hz ≤-70 dBc/Hz
10Hz ≤-87 dBc/Hz
100Hz ≤-114 dBc/Hz
1kHz ≤-130 dBc/Hz
10kHz ≤-140 dBc/Hz
Short-Term Stability: t=1s ≤3E-11
t=10s ≤1.6E-11
t=100s ≤8E-12
Warm-Up Time: 8 – 10 minutes (depends on ambient temperature)
Word Clock Input: 1 x Word Clock Input @ 75 Ohms 3Vpp on BNC 44.1 – 384kHz
Maximum Shock Withstanding: Non-operating, flight case mounted:
100m/s2 (~10.2 g*), 11 msec half-sine pulse per IEC 60068-2-27:2008
Non-operating, in original packing:
300m/s2 (~30.6 g*), 5 msec half-sine pulse per IEC 60068-2-27:2008
* g – gravitational acceleration
Outputs: Word Clock: 4 x BNC
AES/EBU: 2 x XLR
S/PDIF: 2 x RCA
Word Clock Outputs: 4 x Word Clock Outputs @ 75 Ohms 3Vpp on BNC 44.1 – 768 kHz square wave signal
USB I/O: USB 2.0 Hi-Speed; Data stream up to 480Mbits/384kHz, Type B
Clocking System: 4th Generation Acoustically Focused Clocking
64-bit DDS
Oven Controlled Crystal Oscillator
Clock Stability: <+/-0.0 2 PPM, oven controlled at 64.5 °C
Atomic Reference Type: Rubidium Ultra-Stable Resonance-Controlled Master Oscillator
Frequency: 10 MHz
Frequency Accuracy: Better than ±5E-11 @25C (±0.05 PPB)
Aging: Daily* ±2.5E-11
Monthly* ±1E-10
Yearly ±1E-9
(*After 1 day & 1 month of operation respectively)
Atomic Clock Outputs: 10 x BNC Sinusoidal, 10MHz, 75 Ohm, 1Vpp typical (unload)
Sample Rates: 32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384, 768
Word Clock Specs: TTL Level, 75 Ohm Output Impedance
USB: USB 2.0 Full-Speed, Type B, only for control
Operating Temperature: 0-50°C, 32-122°F
Weight: 2.8 kg/6.17 lb
Dimensions: 482.6 (W) х228 (D) х 44 (H) mm
19 (W) x 9 (D) x 1.73 (H) inch
Power Supply: AC
Power Consumption: 15W
Humidity: 30 – 80% RH non-condensing
Power Supply Input: 100 – 240 V~

 

web site by island webservices